You will not want a 12â line feeding your water fountains, water faucets in bathrooms, or water feeds into toilets. You might want to look at typical pipe sizes as a starting point for your design.
Look up building design so you figure out heights that water will have to be transported. Also, consider the difference in elevation between the building and the water line on the southern half of hilltop circle between walker and poplar street.
Determine the sizes of pipes, total length of pipe, and pressure drop (or head loss) to deliver 50 gallons per square foot of space in the new building. You will also have to determine the number of elbows (and potential shut off valves) and the elevation change for different sections of pipe.
As you lay out your piping system, your pipes should run underground, through utility tunnels or buried, but not though existing structures.
I just need a cad design of the building. Does not have to be detailed.+1 Other Responses
Technical Drawings Service
I am looking for technical drawings service provider located within 100 km of the st. Petersburg area.
The service provider should be able to prepare mechanical drawings based on raw technical data or from the plant engineers or based on spare parts samples.
There are a few queries listed below:
1. What programs do they use to prepare the drawings? (autocad, solidworks, compass etc.)
2. Will the documentation provided by them meet russian legislation standards?
3. What is the reaction time they can provide?
--- part of the expected service is urgent (24 hrs reaction time) which means that the service provider must be able to come to the plant location in st. Petersburg within 1 working day after request receipt
4. What is the capacity they can provide?
--- the expected volume of work requires full load of 2 engineers (8 hrs per day; 5 days working week)
kindly reach out to me via zintro+14 Other Responses