Affordably Source Complementary Metal Oxide Semiconductors (cmos) Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Complementary Metal Oxide Semiconductors (cmos) Inquiries

Area Icon

Circuit Assembly

We are looking for experts in " integrated multi-chip circuits" and " photochemical circuit assembly" who can comment on a startup whose technology makes integrated multichip circuits with unprecedented thinness, flexibility, compactness and low cost; uniquely enabling the vision of pervasive electronics inherent in the internet of things. We are an angel investing platform dedicated to connecting deep-tech startups with angel investors. By deep-tech we mean startups founded on scientific breakthroughs and technological innovations that create lasting impact on mankind. As a participating expert in this process, your involvement is limited to answering anywhere between 8-12 investor-submitted questions. This takes about 1 hour (+/-) . Once you are vetted, we also encourage you to be part of an investor pitch call that the startup makes to our network of investors. You get to hear and understand the startup first hand and then use your expertise to respond to investor questions. At this point, we cannot guarantee any monetary reimbursement. You do get insights to new upcoming technologies in your field and a tremendous networking opportunity! if your contribution is published, it will be viewable by potential investors in this startup, giving you an opportunity to make connections, socialize virtually, and gain bragging rights in a vibrant entrepreneurial and angel investing community.

  1. Profile Picture

    Ray |Managing Engineer

    This is definitely something that I'd be happy to be involved and help with. Please help provide fur...

    46 Minutes Later
  2. Profile Picture

    Andrew |President

    I may have useful insight into that technology. I worked for General Instrument's (GI) Microelectro...

    1.6 Hours Later
  3. Profile Picture

    Lloyd |Owner

    Hi. I have 30 years of experience in semiconductors. I have my own consulting company with over 40 c...

    2.3 Hours Later
+10 Other Responses
Area Icon

Semiconductor Demand Trends

We are a prominent nyc-based expert network and an authorized zintro partner. Our client has an immediate need to conduct phone consults with professionals who are able to provide a perspective on demand trends for semiconductors in the automotive and industrial sectors (primarily mcus and processors). Specifically, the client is looking to better understand demand trends and competitive dynamics. Some of the companies in the space include: freescale, nxp semiconductor, infineon, maxim integrated, texas instruments, stmicro. This project has a budget. In your response, please indicate what aspects you are able to discuss and what professional experience allows you to do so.

  1. Profile Picture

    andrei |VP sales & marketing Operations

    I am interested to consult in this space. I am involved with automotive BI for all the major playesr...

    1.9 Hours Later
  2. Profile Picture

    Al |Semicounducto Foundry Consultant - ALMOR

    I am very familiar with as I serviced these Markets for over 20 years. These are typically Mixed Sig...

    5.3 Hours Later
  3. Profile Picture

    Robert |CEO, VP Operations

    Over 40 years experience in Semiconductor industry including automotive and consulting in automotive...

    18.7 Hours Later
+5 Other Responses
Area Icon

Metal Supply And Demand

Dear experts, i am writing on behalf of a consulting firm that conducts expert interviews in support of industry-wide studies for many of the world's fortune 1000 companies. We are an authorized zintro partner. For a current study , we are seeking experts who can share their opinion on: 1) what is the current supply-demand economics of bismuth, gallium, germanium, selenium, indium, tellurium metals (primary and secondary supply as well as end use mix)? 2) how is the supply of the metal expected to move from 2015 to 2020? 3) what are the end use markets expected to move from 2015 to 2020? 4) what could be market discontinuities (supply and demand side) that might change the supply and demand outlook? 5) how is the competitive landscape expected to change over this same timeline? We are scheduling 45-60 minute discussions with experts, this/next week and we are happy to provide a $250 compensation for each interview. If you kindly let me know your contact details (email/phone), i could provide more details on the study and standard process. We would welcome any referrals to other relevant experts as well. Best regards, kolyo

  1. Profile Picture

    Behzad |Aerospace & Renewable

    We are USA based consulting firm with over 24 years of global experience with metals and suppliers i...

    1.5 Hours Later
  2. Profile Picture

    Suresh |Principal Independent Consultant

    I can discuss Germanium very well. The production , ***** supply chain. Done a lot of...

    9.6 Hours Later
  3. Profile Picture

    Tarun |Partner

    Hi Kolyo, I can assist you on this request with detail ***** all the details on mentioned metals....

    13.3 Hours Later
+10 Other Responses
Area Icon

Semiconductor Manufacturing

Hi. I work for a prominent expert network working in partnership with zintro. We would like to source multiple experts on behalf of an institutional investor. Specifically, we are looking for the following i would like to engage with experts who were formerly with semiconductor equipment firms such as applied materials, lam research, asm international, etc, who can discuss the organizational structure of such firms.

  1. Profile Picture

    Rajendra |Houser Banks Prof. & Director Center for

    I have been a consultant to Applied ***** have 36 years of semiconductor industry experience...

    36 Minutes Later
  2. Profile Picture

    Daniela |Owner

    I am an independent analyst with over 24 years experience in the Semiconductor industry. I have succ...

    2.3 Hours Later
  3. Profile Picture

    Tony |Senior Manager

    Hi, I have been with AMAT for more than 10 years as a key person in the CTO Office, and are very fam...

    2.6 Hours Later
+10 Other Responses
Area Icon

Ion Implantation Systems

Looking for vendors for ion implantation process and its machine details,vendor address machine cost

  1. Profile Picture

    Sanford |CEO

    Should you require structured financing for your project, please let me know: Sandy Garrett Presiden...

    1.2 Hours Later
+2 Other Responses
Area Icon

Vehicle Semiconductors

We are a global research firm and an authorized zintro partner looking for experts knowledgeable about trends in semiconductors in vehicles, what kind of chips are going into what segment who can consult with us via phone consultations. We need to talk with experts that have experience on the market for semiconductor and printed circuit board(pcb) manufacturing equipment. Specifically ball and wedge bonding and surfacemount technology (smt) machines in the usa. If interested, please contact me. Thanks!

  1. Profile Picture

    Robert |Test Engineer

    I am currently working on a new sensor technology that is targeted at the automotive market....

    2.1 Hours Later
  2. Profile Picture

    David |Design Engineer

    I have worked with and around SMT equipment. Please feel free to contact me for any questions you m...

    3.3 Hours Later
  3. Profile Picture

    Al |Semicounducto Foundry Consultant - ALMOR

    I have supplied semiconductors to Automotive Market for numerous years in the past. The semiconducto...

    3.8 Hours Later
+8 Other Responses
Area Icon

Semiconductor Trade Usa

Semiconductors - trade practices we would like to connect with experts knowledgeable about the general payment habits in the semiconductor industry: typical receivables and payment history of industry players; sufficient knowledge to compare invoice-to-payment aging averages among various industry players; payment habits of corporate purchasers of semiconductors; and similar other information regarding trade practices in the industry. Expert will be asked to write an expert report and most likely testify at a later date. As such, previous testifying experience is preferred; however, otherwise qualified experts will be considered. Expert must be located in the united states.

  1. Profile Picture

    Joseph |Principal-Consultant

    You'll need CFO in semiconductor sector; I can draw upon my experiences with my past clients in semi...

    19.2 Hours Later
  2. Profile Picture

    Mita |Principal and Consultant

    Can provide significant help!...

    1.3 Days Later
  3. Profile Picture

    Lawrence |Owner

    Why did you send this request to me when I have zero expertise in this area?...

    1.5 Days Later
+3 Other Responses
Area Icon

Precious Metals Chemist

We are interested in hiring a consultant (can perform most of the work from home/experience. May require one to three visits to the site. Travel will be reimbursed.) to assist us in designing a precious metal refinery to refine ore from our mine. Please provide your feedback to the following: -have you built a refinery before? -how many years have you been a precious metals chemist? -what is your expected time frame for completion?

  1. Profile Picture

    Lou |Extraction/Recovery and Refining Technol

    I can assist in your multifaceted project. I have 15 years (am a degrees chemist) of practical rea...

    2.1 Days Later
  2. Profile Picture

    Ralph |Consultant

    I have worked on several precious metal plants, both in *****, startup and design. Yes I have...

    4.2 Days Later
  3. Profile Picture

    Bowen |Research Professor

    Have more than 30 years of experience in metallurgy, mineral processing, exploration, and ***** ...

    6.2 Days Later
+8 Other Responses
Area Icon

Semiconductor Processing

Our company is developing a photonics product which is based on the use of cmos manufacturing back end to create optical structures (not silicon photonics or mems). We are looking for a semiconductor processing expert who can help us figure out how to integrate our designs into a manufacturing process and identify suitable foundries.

  1. Profile Picture

    Joseph |Principal-Consultant

    Hi, thanks for your interest. I've work with semiconductors, metals/oxides, from purifying poly sili...

    1.2 Days Later
  2. Profile Picture

    Darin |CTO & Founder

    I have done similar projects, on even more exotic processes. Including getting CMOS processes to all...

    1.2 Days Later
  3. Profile Picture

    Pradeep |Production Manager

    Hi, please connect to me via linkedin. My name is Pradeep Noronha and I work for production managem...

    1.2 Days Later
+26 Other Responses
Area Icon

Semiconductor Industry

We are a prominent nyc-based expert network and an authorized zintro partner. Our client has an immediate need to to conduct phone consults with multiple experts knowledgeable about the semiconductor industry. More specifically, our client is looking to better understand the following topics: - the differences between different rf vendors like skyworks, the qualifications considered in procurement decisions, and the technical differences between products. - the historical perspective of the rf industry over the past 10 years, and how the offerings have changed over time. - the historical pricing trends for these products and the future outlook for pricing industry-wide. - the differences between skyworks' products and their sales process versus competitive players in the space. This project has a budget.

  1. Profile Picture

    Christopher |Vice President - Operations, Quality and

    I might be interested. Can you be specific about the needs? I've been in RF/Microwave in the past....

    1.9 Hours Later
  2. Profile Picture

    Eric |Executive Consultant

    Same here...

    2 Hours Later
  3. Profile Picture

    Robert |CEO, VP Operations

    Let me know how I can help. Over 40 years S/C experience. Robert Wright...

    2.2 Hours Later
+7 Other Responses
Area Icon

Precious Metal Processing

I am looking for someone who is familiar with precious metal recovery in various industries, e.G. Mining, metal finishing, semiconductor manufacturing using membrane-based systems. Knowledge of the limitations and unmet needs for these types of applications would be very helpful.

  1. Profile Picture

    Alvaro |Technical Consultant

    Hello , I have been refining and recovering precious metals for 37+ years. please contact me if you ...

    1.3 Hours Later
  2. Profile Picture

    Paul |Consultant

    Hello,I have over 30 years of experience in precious metals mining and processing world-wide. I wou...

    1.8 Hours Later
  3. Profile Picture

    Anthony |Chief Geologist

    I have 20+ years in the mining of *****p Metals in the Bushveld Complex of South Africa. I ...

    14.1 Hours Later
+5 Other Responses
Area Icon

Additive Metals Manufacturing For Aerospace & Defense Sector

We are looking to do paid phone consultations with experts that can share insights on the global “additive metals manufacturing outsourcing market for aerospace & defense sector”. We are particularly interested in experts who can share their insights on the following pointers: i. Overall market size of additive metals manufacturing for the aerospace and defense sector and understanding the share of outsourced additive metals manufacturing ii. Strategies adopted by a&d companies for using metal additive manufacturing for in-house part production vs outsourcing. Iii. Future outlook of additive metals manufacturing demand (through to 2030) in the aerospace & defense sector iv. Understanding the volume share growth of additive metals manufacturing being outsourced in near future v. Strategies adopted to collaborate with technical groups/universities vi. Key challenges/barriers that inhibit the outsourcing of additive metals manufacturing as of today preferably looking for experts having experience of 15+ years in heading technological, sourcing, or materials management division of leading aerospace & defense companies. The list of aerospace and defense companies that we are interested in is as follows: 1. Leonardo s.P.A. 2. L3harris technologies, inc. 3. Lockheed martin 4. Bae systems plc 5. Honeywell 6. Northrop grumman corporation 7. Lockheed martin corporation 8. Dassault aviation sa 9. Raytheon technologies corporation 10. Safran sa 11. Aerojet rocketdyne 12. Blue origin 13. Rockwell collins 14. Spacex 15. Thales s.A.

  1. Profile Picture

    Chris |Graduate specializing in Operations

    Hello. I've confirmed work and *****rience of over 10 years in aerospace engineering, wit...

    5.2 Hours Later
  2. Profile Picture

    Njeh |Chairman of Executive Board

    I recently completed a research study on the global additive metals manufacturing industry covering ...

    11.7 Hours Later
  3. Profile Picture

    New |

    I have been Working investment casting Company especially aerospace and defence Company in Turkey...

    3.4 Days Later
+8 Other Responses
See More Inquiries

Complementary metal–oxide–semiconductor (CMOS), is a major class of integrated circuits. CMOS technology is used in microprocessors, microcontrollers, static RAM, and other digital logic circuits. CMOS technology is also used for a wide variety of analog circuits such as image sensors, data converters, and highly integrated transceivers for many types of communication. Frank Wanlass successfully patented CMOS in 1967 (US Patent 3,356,858). CMOS was also sometimes referred to as complementary-symmetry metal–oxide–semiconductor (or COS-MOS). The words "complementary-symmetry" refer to the fact that the typical digital design style with CMOS uses complementary and symmetrical pairs of p-type and n-type metal oxide semiconductor field effect transistors (MOSFETs) for logic functions. Two important characteristics of CMOS devices are high noise immunity and low static power consumption. Significant power is only drawn when the transistors in the CMOS device are switching between on and off states. Consequently, CMOS devices do not produce as much waste heat as other forms of logic, for example transistor-transistor logic (TTL) or NMOS logic, which uses all n-channel devices without p-channel devices. CMOS also allows a high density of logic functions on a chip. The phrase "metal–oxide–semiconductor" is a reference to the physical structure of certain field-effect transistors, having a metal gate electrode placed on top of an oxide insulator, which in turn is on top of a semiconductor material. Aluminum but now the metal is polysilicon. Other metal gates have made a comeback with the advent of high-k dielectric materials in the CMOS process, as announced by IBM and Intel for the 45 nanometer node and beyond

Top Complementary Metal Oxide Semiconductors (cmos) Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+