Affordably Source Digital To Analog Converter (dac) Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Digital To Analog Converter (dac) Inquiries

Area Icon

Propulsion Converter Technology

Propulsion converter technology for hybrid trucks and other vehicles. Need an expert to assist in design of propulsion converters for hybrid vehicles. Our company is a medium size rectifier company in india seeking an expert to assist in developing propulsion converter technology for hybrid trucks and other vehicles.

  1. Profile Picture

    Joseph |Director

    Zi84be50ff Below are initial generic proposals on a direct labor control system that offers up to ...

    3.4 Hours Later
  2. Profile Picture

    Francisco |E&O Manager

    Dear Sirs. We are giving support to a several companies in Europe and APAC (Asia Pacific Area - Ch...

    2.9 Days Later
  3. Profile Picture

    Puneet |Engineer & Entrepreuner

    Hello, Before starting further discussion, we would need more details about the task - primarily is ...

    25.1 Days Later
+5 Other Responses
Area Icon

Analog Circuit Design

Analog circuit design help - we have a low level analog circuit that uses an op amp to measure capacitance. We have a low level oscillation problem at certain frequencies and need help identifiying the cause and solving the problem. I anticipate this will require analysis and simulation work down to the op amp internal circuitry level as feedback is involved.

  1. Profile Picture

    FRED |President

    I will be available to work on this problem in mid September. I am familiar with the use of circuit ...

    12 Minutes Later
  2. Profile Picture

    David |Chief Designer

    Hello, I'm an analog circuit designer with experience in *****-amp designs Please feel free ...

    37 Minutes Later
  3. Profile Picture

    Christine |Engineer

    Hello, I have experience in analogue circuit design from both theoretical and practical background u...

    1.4 Hours Later
+9 Other Responses
Area Icon

Analog Ic Design

Looking for a digital / analog design consultant to convert a simple prototype circuit into an ic. Circuit includes a couple of ttl gates and two +5v and two -180v cmos transistors with current limiting. Thanks, wes rf & microwave engineer ****, inc. **** ****, ca ****

  1. Profile Picture

    Emilijan |General Manager

    What is the projected production volume?...

    1 Hour Later
  2. Profile Picture

    Ahmad |President

    I do custom chips, and we are in San Jose, CA. Do you want everything to be in one chip? And, do ...

    12.4 Hours Later
  3. Profile Picture

    Pierre |Principal Engineer

    Hello Wes, I have successfully carried out this kind of project. I can also help you work with t...

    12.9 Hours Later
+9 Other Responses
Area Icon

Vehicle Catalytic Converter

Need a person that can provide a standard formulation for washcoats that are applied to automotive catalytic converter monoliths. Not looking for the active catalytic materials, only the binders, dispersants, thickening agents, agents that can be used with high surface area alumina, ceria, and zirconia ceramic powders.

  1. Profile Picture

    VICTOR |Zintro Expert

    Solvent or ***** ?? Phenolic, or ceramic either way I can help you ...

    4.8 Hours Later
  2. Profile Picture

    Kameswara |President & Principal Consultant

    Thank you for the inquiry. We use rheology to optimize the formulation. Welcome if you need help. ...

    5.7 Hours Later
+2 Other Responses
Area Icon

Analog Mixed Signal Design Pspice Simulation

I have an orcad schematic capture of a dc-dc converter completed. It is a mil-spec hybrid design, rad tolerant, space qualified. Need pspice component library built for 90 components in the design. The circuit is mostly resistors, caps, and transistors, but there is a custom transformer and inductors, as well as several ics (op amps, buck converter, pwm, linear regulators). I have a full bom with correct mil p/ns. Once library is built, need to run circuit analysis, including montecarlo, and stress analysis.

  1. Profile Picture

    Scott |CEO

    I do this pretty frequently in LTSPICE....

    1.8 Hours Later
  2. Profile Picture

    Aliasgar |Analog Mixed Signal Design and DFT Engin

    Hi, I am a senior Circuit Designer and I should be able to help you out with this...

    14.1 Days Later
  3. Profile Picture

    New |

    I can support... Pls do contact me. I am Bala from bangalore working as Hardware engineering manag...

    31.5 Days Later
+4 Other Responses
Area Icon

Power Converter

With zintro'€™s approval, we are using a novel approach to recruit a ceo for one of our portfolio companies. We have done this once before with excellent results. Instead of paying a fee to a recruitment firm, we are offering $20k to any zintro member that refers a successful ceo candidate. You can apply for the job yourself, but will not be eligible for the referral fee in that case. *** is a development stage company that has a disruptive solution for the power conversion market. They have developed a unique architecture that enables power converters to be significantly smaller, lighter and cheaper. This architecture can have a far-reaching impact on the market, and enables rapidly growing applications such as pv inverter arrays, ev charging, and micro-grids. *** is fully funded and working towards licensing its technology to oem partners. The company (located in austin, tx) is tracking towards an ipo in q4 of 2013. The compensation range is $200 - $300k per year, plus meaningful equity incentives. Ideal candidate will has: - previous executive management experience (ceo preferred) - expertise in the power converter space - experience with ip licensing/strategy - startup and public company experience if you would like to refer someone, please reply by znote.

  1. Profile Picture

    Gautam |Principal

    I am recommending Dr. Rajiv Arya, formerly CEO, Moser Baer Solar and CTO, Optisolar. He can be reach...

    28 Minutes Later
  2. Profile Picture

    Bruce |CEO

    I have had 20+ yeasr in the Solar PV business and have been a consultant to Shanghai Macsolar and Pa...

    48 Minutes Later
  3. Profile Picture

    Jesse |CEO

    I Jesse Tippett hereby refer, Peter Kiggen LinkedIn profile: *****.linkedin.com/?ahoy=n...

    50 Minutes Later
+212 Other Responses
See More Inquiries

Top Digital To Analog Converter (dac) Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+