Electrical Service
I would like to try to remove water from inside an electrical cables which provide electrical service to a building. The connection to the road transformers was not weather proof and subsequently allowed water to get in. Those connections were done by the local utilities company, and yes it was them who shut the power off sighting walter in the cables years ago i use to work in a refinery and remembered the use of nitrogen for purging purposes. Would anyone know if there is a company located near ontario, canada who could provide this type of service? The cables are 750 mcm conductors (about 1" in dia.) and are about 300 ft. In length running from the pole at the street through a 4" dia. Plastic conduit (concrete encased) to the disconnect panel in the buildings mechanical room
David |Owner/President
Please contact Me at Motechs Electric to help....
6.2 Hours LaterSteven |President
They should seal their end per NEC *****G. If this electrical service is above 600 volts, purge with...
7 Hours LaterChaman |EMC Consultant
I’m expert Electromagnetic ***** (EMC) professional. I have over 20 years of progressive exp...
8.2 Days Later