Affordably Source Electronic Gas Flow Technology Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here

How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Electronic Gas Flow Technology Inquiries

Area Icon

Natural Gas Purification And Removal Of Mercury Or Hg

I would like to find a consultant skilled in the art of mercury removal in natural gas processing.

  1. Profile Picture

    Amarjit |CEO/VP/ Project Director/CTO

    I have ben involved with technologies for the removal of mercury of ***** and other areas also...

    1.1 Days Later
+1 Other Responses
Area Icon

Amine Gas Treating

I would like to simulate amine gas sweetening unit in order to optimize the steam consumption at the rebiller. I tray to set the sweet gas spec and the rich amine loading but the model did not converge

  1. Profile Picture

    Lawrence |Principal

    I can advise on what software to model this system for you....

    1 Hour Later
  2. Profile Picture

    Scott |Principal

    What software are you using?...

    1.7 Hours Later
  3. Profile Picture

    Mohamed |Co-Founder

    Dear Sir, What process ***** you using ? Regards,...

    3.2 Hours Later
+5 Other Responses
Area Icon

Flow Control

I have a process with excessive vaiability. I am feeding a mixer where the viscosity change within the mixer causes pressure swings and upsets he feedrates of the raw materials feeding the mixer. I currently use a mass flow meter to measure the flow and gear pumps with vfd to control the flow. I could go to a piston pump to deliver constant flow regardless of pressure (i think) but i am a little concerned about pulsating flow. Is this an area you have expertise? I work for in the ******** of florida in the chemical industry. Kirk

  1. Profile Picture

    Mohammad |Co-founder (M.Sc. Control Engineering)

    Hi I have extensive process control experience. I am working with major oil and gas producers for co...

    1.2 Hours Later
  2. Profile Picture

    Nir |CTO

    Sounds like something our company has much knowledge and expertise in. But before that, I have few q...

    3.9 Hours Later
+4 Other Responses
Area Icon

3d Printing Technology

Insights analyst --- general job description: we are seeking analysts to lead the design, analysis and synthesis of primary and secondary research to identify actionable insights from multiple sectors including - 3d printing, smart textiles, textiles, sports betting, uk shale gas, aquaculture, tobacco, electronic cigarettes, printing technology, a selection of consumer facing uk plcs. View our coverage at http://***************************

  1. Profile Picture

    Bill |President, Fisheries Technology Associat

    My career in fisheries and aquaculture spans more than 37 years, including six years in research at ...

    1.3 Hours Later
  2. Profile Picture

    Ian |Managing Director

    Because neither of us are premium users, we cannot exchange emails as Zintro will not allow off plat...

    21.7 Hours Later
  3. Profile Picture

    Michael |Research Fellow

    Good afternoon - I have a wealth of experience in research and analysis, primarily in shale gas and ...

    8.1 Days Later
+15 Other Responses
Area Icon

Malaysia Control Valve Supply Market Information

We are studying the control valve supply market in malaysia. We need your inputs about the following information: 1. Cost structure/model of control valve production and cost drivers 2. Information on control valve manufacturers (specifically in malaysia/south east asia) such as emerson, ge energy, flowserve, samson controls, metso, severn glocon, and nihon koso - strengths and weaknesses - supply capacity please answer briefly the questions below: 1.Can you share your brief experience involving the control valve supply market and your direct involvement in this space? 2.Are you able to offer insight on the cost structure/model of control valve production and cost drivers and share information about manufacturers specifically in malaysia/south east asia? 3.Can you share your knowledge about the top five oil & gas clients operating in asia and their control valve suppliers?

  1. Profile Picture

    Job |CEO/Finance Director

    Dear Sir/madam, I can give you best results within the shortest time. Reply with timelines and budg...

    2.6 Days Later
  2. Profile Picture

    Susanta |President

    Dear Sir, I can support you with the MI report. Please share your deliverable questions in my email ...

    5.2 Days Later
  3. Profile Picture

    Adithya |Area Sales Manager

    1. I have been in the control valve industry since the past 11 years, which is my career all along. ...

    8.4 Days Later
+7 Other Responses
Area Icon

Lpg Transportation In North America

I am trying to assess the components used in the containers/vessels used to transport lng, lpg, and natural gas in north america. Here i am trying to understand the us dot number for rail and truck tanks used to transfer the above mentioned fluids and the current fleet size. I am also trying to asses the what is the percentage of pipeline deployed for the transfer of the same. I would also like to understand how the fleet of rail tank and truck tank dedicated to lng, lpg and natural gas transport projected to grow till 2022 in north america and which are the key reasons. In this study we are also trying to assess the competitive landscape where we would like to gain more clarity on which are the leading component supplier (such as rego) in north america. Given the transport of these hazardous fluids comes under the regulatory scrutiny, i would also like to touch base on the existing and upcoming regulations which can impact the market.

  1. Profile Picture

    Warren |Industry Economist

    This is a very broad inquiry. It is unlikely there is anyone in this field who could cover the vario...

    7 Hours Later
  2. Profile Picture

    Rafey |Senior Engineer P & C, Piping, Acting Co

    Yes I am interested and available...

    7.2 Hours Later
  3. Profile Picture

    Michael |CEO

    any/all info I've got on this, including referral details for other experts in the industry...

    9.5 Hours Later
+6 Other Responses
Area Icon

O&g Donwstream And Refining

Dear experts,   i am writing on behalf of a consulting firm that conducts expert interviews in support of industry-wide studies for many of the world's fortune 1000 companies. We are an authorized zintro partner.   for a current study, we are seeking experts to help us better understand trends, opportunities and recent developments in the media industry focused on o&g downstream and refining. We are particularly interested in companies like platts and argus, so expert knowledgeable on these companies (e.G. Former employees, clients) would be preferred.  please note that we are not looking for any confidential information and are only interested in your personal point of view and shared learnings. Our practice is to keep your identity anonymous, as well as that of our client.   we are scheduling 45-60 minute discussions with experts, this/next week and we are happy to provide a compensation for each interview.   if you kindly let me know your contact details (email/phone), i could provide more details on the study and standard process.   we would welcome any referrals to other relevant experts as well.   best regards, kolyo 

  1. Profile Picture

    Jay |Petroleum Consultant

    Woul like to offer my services to you offering my experience and insight to answer your questions....

    3.3 Hours Later
  2. Profile Picture

    Larry |President

    I have experience with major industry news and pricing pubs lije platts, argus, meed, opism cera and...

    3.3 Hours Later
  3. Profile Picture

    Alan |Principal

    I have been involved with energy pricing services for approximately 30 years. I began my career with...

    3.4 Hours Later
+11 Other Responses
Area Icon

Technology Of Life Support Machines

We would like to speak with experts from gas and heat exchangers used in oxygenator, heart-lung machines, artificial lungs to understand trends and specifications of gas and heat exchangers, materials, and their technology. This would be a paid 45- 60 mins of phone consultation. 1. Would you be able to discuss/share in-depth insights on the below mentioned questions? - which type of gas and heat exchangers are popularly being used? - what are the specifications of recent exchangers (specification: pore size, surface area, flow-volume, operational time) - which materials are being used to develop: o exchanger core surface o coatings - which production technologies are being used? (cvd, - what is the opinion on the use of carbon nanotubes, or other high surface material for designing gas exchangers? - which companies, startups, and universities are developing/ researching in the domain? 2. On a scale of 1 to 10 (1 – no knowledgeable, 10 – highly knowledgeable), how knowledgeable would you say you are regarding the gas and heat exchangers used in life support machines?

  1. Profile Picture

    Sunil |Product & Technical Manager- Cardiac Sur


    3.9 Days Later
  2. Profile Picture

    Brian |Sr. Engineering Manager

    I don't have background with gas and heat exchangers, but would be interested in this type of consul...

    3.9 Days Later
  3. Profile Picture

    Rob |CEO

    I am able to advice on this topic Large experience with this equipment and it’s disposables See my ...

    4.1 Days Later
+7 Other Responses
Area Icon

Co2 Recovery In North Europe

I am looking for expertise on the cost structure of carbon dioxide recovery methods in northern europe (baltic sea region). The specifics include cost structure of various co2 recovery methods across value chain, pros and cons of the methods, best practices in production methods baltic sea region: denmark, estonia, latvia, finland, germany, lithuania, poland, russia, norway and sweden cost structure (%)involves: recovery cost, purification and liquefaction cost, logistics cost, sales profit margin for the following recovery methods and end use industries recovery methods: ethanol production (fermentation), ammonia production, ethylene production, hydrogen manufacturing , natural gas processing, oxy fuel, pre combustion, post combustion end use industries (for profit margins): food and beverage, eor, pharma, urea production, water treatment, dry ice, co2 storage

  1. Profile Picture

    Michael |Managing Director

    I have extensive experience with CO2 recovery methods through conventional removal methods, as well ...

    4.6 Hours Later
  2. Profile Picture

    Sudhir |Managing Director

    I am an experienced *****ical Engineer with over 45 years experience in Chemical, Pharma...

    4.7 Hours Later
  3. Profile Picture

    John |Advisory Board Member

    I am an *****rt in cement and CO2 reductions in the cement industry....

    5.1 Hours Later
+8 Other Responses
Area Icon


We have undertaken a project on amines and have recently completed data triangulation process. We are looking for expert validation for the aforementioned data. The data that needs to be validated is based on amines consumption by type (ethyleneamines, alkylamines, fatty amines, specialty amines, ethanolamines) and by region (including country level). In addition, amines demand in oil and gas industry is needed. Cheers, hareesh

  1. Profile Picture

    Michael |Managing Director

    Hareesh, I have worked with amines for gas ***** purification, and have done some tech deve...

    1.6 Hours Later
  2. Profile Picture

    Paulo |Principal

    Hareesh, I worked for Dow Chemical for 35 years. As a consultant, I have done market analysis about ...

    1.9 Hours Later
  3. Profile Picture

    Muthuramalingam |Consultant

    You can send me the Table to ***** proceed further on this project.Thanks....

    2.4 Hours Later
+8 Other Responses
Area Icon

Geospatial Technology In Gas Line Industry

Project background: a subsidiary of a gas utility company manages a nation-wide grid of gas lines. Inspection of these gas networks currently requires workers to “walk the line” to identify patterns of leakage, assess risk, and report damage. This is a highly time, labor, and cost intensive process. Our client's team leadership would like to understand how geospatial satellite imagery and pattern recognition software may be used to identify gas leaks, and potentially provide other benefits. Seeking facilitators: seeking a lead facilitator who excels in problem definition, data distillation, and who has relevant experience in gas utility or geospatial technology. Seeking participants: • geospatial technologists • gas line engineers and grid operators • data analysis experts in related fields participation will entail ~15 minutes each day for each participant over the course of 4 days at the convenience of each contributor. Experts will be remunerated for 1 hour of their time. Screening question: given the focus for this think-tank, why do you think you’re uniquely positioned to provide valuable feedback to this client? Please be specific with regards to your background, perspective, and experience.

  1. Profile Picture

    Guillermo |Software Developer

    I would recommend to use hyperspectral detectors for gas leaks and drone technology. It is extremely...

    9.3 Hours Later
  2. Profile Picture

    Charles |Consultant-Analyst-Programmer

    Your project sounds very interesting. I can provide your team with over 35 years of formal educatio...

    5 Days Later
  3. Profile Picture

    David |PRESIDENT

    38 years of global experience as an oilfield services company owner and consultant involved in pipel...

    8 Days Later
+38 Other Responses
Area Icon

Forum Energy Technologies

We are a prominent nyc-based expert network and an authorized zintro partner. Our client has an immediate need to to conduct phone consults with multiple experts knowledgeable about forum energy technologies and their consumable division. Ideal candidates should have a deep knowledge of the replacement frequency of forum’s consumable products used in flow control (valves, pumps, sensors), downhole products (casing and cementing tools), and pressure pumping (fluid ends, pumps, valves, manifolds). The client is not interested in talking with current employees of forum energy, cameron or fmc. This project has a budget.

  1. Profile Picture

    Rameshsingh |Green Building Project Consultant,Water

    I'm an ***** *****gement, sports fields , Pump specialist. ...

    2.1 Hours Later
  2. Profile Picture

    Mohamed |Senior Mechanical Engineer

    I am mechanical engineer ,I have more 8 years experience in oil and gas especially of pumps and valv...

    2.3 Hours Later
  3. Profile Picture

    David |PRESIDENT

    38 years of global experience as a former oilfield services company owner involved in the supply and...

    2.3 Hours Later
+9 Other Responses
See More Inquiries

Top Electronic Gas Flow Technology Experts

See More Experts