Source Manufacturing Experts for your Project, Phone Consult or Job

Submit an anonymous Inquiry -- Start receiving responses within a few hours

Have a need? Explain it here

Zintro does not display, sell or trade e-mail addresses

An eye iconForgot password?
Submit Inquiry

By clicking Submit Inquiry you agree to our TermsVIEW

or Request a Demo

How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Manufacturing Inquiries

Area Icon

Soda Ash Manufacturing

We are an authorized zintro partner and are currently involved in a study to understand soda ash manufacturers  in india and north america. We would like to connect with professionals with experience in soda ash manufacturing company preferably involved in marketing function in either countries.

  1. Profile Picture

    Richard |Environmental Engineering Consultant

    I am familiar with the Solvay CaCO3 process; I worked as environmental engineer for Allied Signal - ...

    10 Hours Later
  2. Profile Picture

    Nimain Charan |Managing Director and CEO

    You can contact me. I am a Ph.D. with 30years of industry experience including chemicals. The appoin...

    17.6 Hours Later
  3. Profile Picture

    Kaushik |Scientific Officer

    I have a PhD in manufacturing chemistry. I have published many articles on industrial manufacturing ...

    1.6 Days Later
+3 Other Responses
Area Icon

Pellet Manufacturing

Management and operation of a wood pellet manufacturing facility to be located in mississippi

  1. Profile Picture

    Lawrence |Principal

    I am an expert on the wood pellet production. At ArborGen I advise leading pellet firms on supply ch...

    6.6 Hours Later
  2. Profile Picture

    Candy |Zintro Expert

    pls contact me: *****, thanks ...

    7.3 Hours Later
  3. Profile Picture

    Balakrishna |Zintro Expert

    I have the expertise in iron ore pellet making.any one who would like to have your needs can contact...

    14.4 Hours Later
+7 Other Responses
Area Icon

Detergent Manufacturing

Hi all, we are a logistics firm based in nairobi/ kenya with operations in the east & central african region, currently looking into the laundry bar soap manufacturing business. We are at present a service industry and have no experience in the manufacture of fmcg, in particular soaps, and limited experience in manufacturing as a whole. Would like to come up with a brief viability study of laundry soap manufacturing in kenya, using soap noodles as the raw material. Any help with the costings of manufacturing process would be appreciated and could lead to a contract to commission and train our personal.

  1. Profile Picture

    Joseph | ----------------Director---------------

    Zi85dd88 Here are initial generic proposals on a direct labor control system that offers up to 40%...

    49 Minutes Later
  2. Profile Picture

    ghayur |Commercial Manager

    I am interested, if you than contact me. Regards ghayur...

    4.4 Hours Later
  3. Profile Picture

    New |

    Hi, Your project fits me in. Please contact me on johnxjohnx55 I can provide consultancy Rgds J...

    1.6 Days Later
+7 Other Responses
Area Icon

Asphalt Emulsion Manufacturing In India

We want to manufacture silicone emulsion for rubber industries (as mould releasing agent). want details about raw material,manufacturing process etc. we want consultant for this purpose. Regards surander

  1. Profile Picture

    Anant |Consultant

    Dear I can help you In Asphalt Emulsion I can also if Possible arrange Paid Pilot Trial for the Asp...

    4.3 Hours Later
  2. Profile Picture

    Jaisheel |Prop.

    we, ***** offer complete tech know how with ********** silicon emulsion (...

    4.6 Hours Later
  3. Profile Picture

    New |

    we ***** offer complete technology for asphalt emulsions we are from mumbai india...

    15.9 Days Later
+3 Other Responses
Area Icon

Medical Syringe Manufacturing

We are interested in building a manufacturing unit.The land is located in free tax zone of industry for ten years. We need to establish manufacturing unit for thee products as follows. 1. Disposable syringes three part 3ml, 5ml and 10ml with need in blister packing eto. 2. Intravenous cannula with small wings with injection port sizes g-18, 20, 22 & 24, blister packing eto. 3. Intravenous infusion delivery set (i.V. Set), 150 cm tube small drop chamber, small fluid regulator, latex connection with luer slip with needle, blister packing eto. We need a consultant firm to establish a map, and machines proposal for this unit. Regards azizi

  1. Profile Picture

    Joseph | ----------------Director---------------

    Zidcf29e I have manufacturing experience as a general foreman, industrial engineer, manufacturing e...

    12.1 Hours Later
  2. Profile Picture

    Madan |CEO

    Hello, Is it in India or outside???...

    1.4 Days Later
  3. Profile Picture

    Umberto |Previously: COO, VP & Director Regulator

    Dear inquirer, I have extensive experience working in this area as well as my team does too. I hav...

    1.4 Days Later
+10 Other Responses
Area Icon

Silicone Emulsion Manufacturing

We want to manufacture silicone emulsion for release of rubber mould and polish etc. We are having plant and machinery and need advice for manufacturing etc please give some details and your expected charges

  1. Profile Picture

    Isaac |Zintro Expert

    Hi there, why manufacture? why don't you simply buy one? Tx. Isaac...

    2.4 Hours Later
  2. Profile Picture

    Kameswara |President & Principal Consultant

    We can help with the *****lopment based on rheological *****k you for the in...

    3.4 Hours Later
  3. Profile Picture

    Jaisheel |Prop.

    we offer pls contact ***** for complete ***** different concentration, for rub...

    3.7 Hours Later
+7 Other Responses
Area Icon

Manufacturing

Needed: experienced manufacturing engineering consultant in southern california. To review the design for manufacture (dfm) of a new electro-mechanical product (to be produced near ventura) and to review the envisioned production/assembly process -- and make any relevant recommendations for improvement. During production, be available for problem solving.

  1. Profile Picture

    Debbie |CEO, VI Ventures LLC

    Hello, I'm interested - please send me your email if you need more info from me, or let me know whe...

    2.8 Hours Later
  2. Profile Picture

    Walter |Principal, W.R.Whitman & Associates

    Thank you for the inquiry. I have successfully established a number of robust production processes o...

    5.8 Hours Later
  3. Profile Picture

    B. Scott Farrenkopf |President and Managing Partner

    S. Blakely, I am the Managing Partner of a consultancy in Ventura County, CA. I have held workin...

    6.7 Hours Later
+6 Other Responses
Area Icon

Wire And Cable Manufacturing

We are looking for someone who can help us set up a cable manufacturing facility in melbourne, australia. The cables are high quality, rugged and to be used in military applications. We are setting up a project to enable us to manufacture these complex, custom-designed cable assemblies from various size core cables, but we need an expert to assist us with: (i) identify the required equipment (ii) assist with sourcing the right equipment and (iii) assist with the installation & commissioning process(es). We want someone who has successfully done this before, with demonstrated experience and knowledge. Knowledge of defence standards and experience in military applications is an advantage. Work is based in melbourne, australia.

  1. Profile Picture

    Joseph | ----------------Director---------------

    Zi***** Here are initial generic proposals on a direct labor control system that offers up to 40% ...

    7.3 Hours Later
  2. Profile Picture

    Sitaram |President & Principal

    Seems like from the brief description you have provided, that this project is very large and you nee...

    11.6 Hours Later
  3. Profile Picture

    James |Sales & Marketing Manager

    Why not just ***** an existing company that knows the Australian Government programs. I ...

    14 Hours Later
+10 Other Responses
Area Icon

Office Furniture Manufacturing

I work for a major office furniture manufacturer and we are looking at to learn more about solid surface manufacturing processes (specifically, molding for arm caps, solid surface (i.E. Corian) manufacturing – molding, thermoforming, fabricating, etc. ). I'd like to have an hour call with an expert to: 1. Understand more about the manufacturing process, things we should consider, part constraints, etc. 2. Get a list of the key players in the industry we could / should engage. Thanks, ken

  1. Profile Picture

    Sunil |President, CEO, Director, Manager, Engin

    Ken, We have worked on many components of office furniture including arm caps. We are the leading ex...

    2.9 Days Later
  2. Profile Picture

    DREYER |General Manager

    Hi Ken, I worked in India for Supreme and Nilkamal, in France with Philippe Starck (designer) and in...

    2.9 Days Later
  3. Profile Picture

    Nestor |Desiner,.PRD Chief, Production Manager,G

    hello Ken, I am in this Industry for quite sometimes already I can be of your best assistance in any...

    2.9 Days Later
+12 Other Responses
Area Icon

Wind Turbine Manufacturing

I need help to prepare an estimate cost for a small wind turbine manufacturing factory. The factory should be fully equipped to manufacture generators, blades, supporting arms for the blades, supporting hub for the generator and the supporting structure/pole for the whole wind turbine. Other than this, there would be inverters and controllers for the wind turbine manufactured in the same factory. There will be a packaging section too. The factory should be capable of producing up to 100 small wind turbine systems per day. This is for preparing a project report. I need expert advice on the types of machineries involved and it's cost.

  1. Profile Picture

    Miguel Catalin |Mechanical Engineer

    I would like to know the power you want to ***** the wind turbine...

    19.1 Hours Later
  2. Profile Picture

    Behzad |VP of Technology

    I have over 25 years of industry experience, have served as VP of Technology at Vestas and I have al...

    19.1 Hours Later
  3. Profile Picture

    Richard |CTO

    I have 30+ years in wind energy and in particular the design, manufacture and supply....

    19.5 Hours Later
+22 Other Responses
Area Icon

Brush Head Manufacturing

I have a patented brush head that i want to manufacture. I am looking for someone with skills in manufacturing technology who can help design the simplest process possible for manufacturing this item. Conceptually this seems pretty easy, but in practice manufacturers seem to have problems industrializing this process for large quantity production and reliable quality assurance. Product description: - the brush head has a hemispherical shape, and a perforated plastic elastic cover cloth is stretched over the surface to sandwich and hold a cotton absorbent pad in place. - the cover material has to be anchored along the edge of the brush head, e.G. By a retainer ring, and then cut precisely to affect a neat finished edge. Please respond with a brief description of your relevant experience, thank you.

  1. Profile Picture

    Joseph | ----------------Director---------------

    Zi*****d We have manufacturing experience as a production foreman, general foreman, industrial en...

    2 Hours Later
  2. Profile Picture

    Richard |COO, VP Operations, Co- Founder, VP Sale

    I have over 25 years of manufacturing from startup and concept to design, prototype and 1st article ...

    6.3 Hours Later
+3 Other Responses
Area Icon

Contract Manufacturing In Europe

We are trying to understand the sales and market dynamics of european api contract manufacturing organization and purchasing on the drug company/formulator side.For this , we would would like to get in touch with experts who can comment on pharmaceutical distribution space (distribution of generic drugs) with reference to the following points : • typical margins in the generic generics distribution business • mechanism to select suppliers (drug manufactures selection based only on price?) • their view on the profitability and reliability of indian suppliers • difference in cost structure between indian suppliers and suppliers from the us additionally, we would also like to speak to experts who have a clear understanding of us market (fda – anda approvals, cost differences, margins in the us business, key success factors etc.).

  1. Profile Picture

    Shyam |VP of Finance

    Based on my branded generics experience with the US market at Core and Claris life sciences I can as...

    3 Hours Later
  2. Profile Picture

    sethuraman |Mr.

    I would be able to give you this information. I have relevant experience in this domain and a CPO m...

    11.2 Hours Later
  3. Profile Picture

    Rita |Principle

    Dear Market-Research-Firm, I would be happy to help you with this project. I have been working with...

    12.6 Hours Later
+6 Other Responses
See More Inquiries

Top Manufacturing Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+