Affordably Source Microturbines Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Microturbines Inquiries

Area Icon

Wind Turbine Manufacturing

I need help to prepare an estimate cost for a small wind turbine manufacturing factory. The factory should be fully equipped to manufacture generators, blades, supporting arms for the blades, supporting hub for the generator and the supporting structure/pole for the whole wind turbine. Other than this, there would be inverters and controllers for the wind turbine manufactured in the same factory. There will be a packaging section too. The factory should be capable of producing up to 100 small wind turbine systems per day. This is for preparing a project report. I need expert advice on the types of machineries involved and it's cost.

  1. Profile Picture

    Miguel Catalin |Mechanical Engineer

    I would like to know the power you want to ***** the wind turbine...

    19.1 Hours Later
  2. Profile Picture

    Behzad |Aerospace & Renewable

    I have over 25 years of industry experience, have served as VP of Technology at Vestas and I have al...

    19.1 Hours Later
  3. Profile Picture

    Richard |Technical Manger UK

    I have 30+ years in wind energy and in particular the design, manufacture and supply....

    19.5 Hours Later
+22 Other Responses
Area Icon

Gas Turbines Maintenance And Costs Brazil + Latam

We are looking for an expert who can provide information on maintenance of the natural gas turbines used in brazil. The region in focus is brazil, however insights into other prominent regions in latin america could be used to compare as well. Scope – 1. Detailed maintenance costs for gas turbines 4. Key potential service companies for maintenance of gas turbines, and oem suppliers in brazil region – brazil, with supporting insights from latin america and other global majors as examples below are the main asks – maintenance of gas turbines 1. Defining the key cost components and breakup for the maintenance of gas turbines 2. Detailed cost structure with key cost insights 3. Key cost drivers that impact the maintenance of gas turbines

  1. Profile Picture

    Gautam(Tom) |

    I have managed maintenance of Gas Turbines globally and can throw some light into the ***** wel...

    79.5 Days Later
  2. Profile Picture

    Srinivasan |Co-founder

    I can consult on this. As President of ***** did a LTA with El Paso in Manaus. There were no...

    80.4 Days Later
+4 Other Responses
Area Icon

Gas Turbine Mro

I am working on the gas turbine mro market. I am looking for the market size of maintenance, repair and overhaul services of the gas turbine in a year. Also, i want to know the market size of repair services for hot section parts of gas turbine section such as blades and vanes. Please respond with your timeline and quote for this.

  1. Profile Picture

    Srinivasan |Co-founder

    I have been involved in gas turbine hot section components since 1977. I am very familiar with the m...

    6.3 Hours Later
  2. Profile Picture

    Chandra |Partner

    I am senior MRO expert with a vast experience of over 25 years in MRO in Chemical,Oil&gas and Petroc...

    1.8 Days Later
  3. Profile Picture

    JD |CEO

    Maybe able to provide *****ed we have fabulous 250KW methane gas turbines...

    32.3 Days Later
+8 Other Responses
Area Icon

Wind Energy

Wind turbine manufacturing and wind farm construction we are an egyptian green energy a newly established company our project is going through 2 stages the first stage will be manufacturing the wind turbine second stage is to install the wind turbine into a wind farm. Wind technology, the production line, the management will be through a union of american and french companies our factory will be mobile, fully automated, can produce onshore, and offshore wind turbine, also can produce either small or huge wind turbines. Our target is to produce 2000 turbines of the 10mw/ h during one year. It is a huge project as we believe we will depend on100% leasing module in financing the project. Now we are forming our board experts members, and the supporting consultant teams. We had an agreement with some famous and with good reputation experts in more than one specialty. Negotiations are still running with others. Also we hope if we can join foreigner experts in different aspects that may benefit the project such as experts in different wind energy aspects, financing solution, legal aspects, marketing, management, and planning. Our experts will be paid through a percentage of the net profit our project value evaluation may be as much as 4-5 billion dollars. What we need from our experts? 1- we need to assess the best sites to start our wind farm either onshore or offshore. 2-doing the complete feasibility study of the whole project. 3-choosing the best wind turbine or turbines that should be produced in our factory? 4- marketing research 5- financial solutions 6- others if you feel it is a challenging project and suits you please contact us. Best regards, sameh

  1. Profile Picture

    Kurt C. |Consultant

    Sorry, can you clarify please: You aim at building 2000 units of 10MW (per unit) wind turbines? If ...

    1.6 Hours Later
  2. Profile Picture

    Shankar |Sr. Manager - R & D

    Hi, I am interested in this project. You can see my expertise from my profile. Contact details: Ema...

    9.8 Hours Later
  3. Profile Picture

    Valentin |Project Development Manager

    Dear Sameh, As I told you, I can support you on this project. But mu current project, can realease m...

    10.5 Hours Later
+7 Other Responses
Area Icon

Steam Turbine Manufacturing Cost

We are looking for an expert for the cost of a steam turbine used in a petrochemical/oil and gas refinery. We are interested in understanding the below factors: 1. Labor cost 2. Material cost 3. Oems (steam turbine components cost- rotors, casing, blades, nozzles shaft, lubrication system etc) 4. Equipment 5. Others cost related to manufacturing and associated services please share your contact number and email id for the pre-consult discussion.

  1. Profile Picture

    Behzad |Aerospace & Renewable

    I consult globally in this space and I could provide the required *****d on my over 29 ye...

    3.5 Hours Later
  2. Profile Picture

    Bharath |Regional Sales Manager

    I can help you out with this. +*****. *****...

    20.1 Hours Later
  3. Profile Picture

    Vinod |Head - Materials ( Procurement, Sourcing

    (1). Last 15 Year working in Steam Turbine & Combined Power Plant OEM Equipment manufacturing c...

    1.2 Days Later
+11 Other Responses
Area Icon

Turbine Manufacturing

Please see the attached information: you can see the you tube video: the double wind turbine is part of the wave turbine which is patented in the us. The double wind turbine besides extracting energy from wave as it was originally designed. Will function just as well a top of a house a boat a cruise ship or cargo ship. This turbine is a vertical axle turbine. Made up of two turbines one inside the other and spinning in the same direction. This turbine can be seen at: https://www.Youtube.Com/watch?V=textqs3tqke we are interested in licensing it to a company or investors which are interested in manufacturing and marketing it. You can get in touch with us if you are interested please do ask for more information.

  1. Profile Picture

    Bert |CEO

    Please provide essential performance and cost data: Cut-in wind speed, maximum wind speed, overspee...

    4.6 Hours Later
  2. Profile Picture

    Joseph |Director

    Zi003d9717 Below are initial generic proposals on a direct labor control system that offers up to ...

    7.9 Hours Later
+4 Other Responses
Area Icon

Gas Turbines Maintenance And After Sales Services

We are looking for experts who have worked in gas turbine maintenance services in the sea region and can give us insights on the contract agreements to carry out the maintenance services. We are interested in the following information: 1. Engagement practices performed by the companies either with oem or isp, along with case examples 2. How other o&g companies or other industry players manage their contract for gas turbine services the regional coverage is the sea region with a focus on malaysia. Kindly share your contact details for a pre-consulting call.

  1. Profile Picture

    Vishal |Senior Project Manager

    Hi, I would be able to assist you on this. Please check DM for details. Thank you....

    10.4 Hours Later
  2. Profile Picture

    Sandro |Founder & Partner

    I was in charge of the GE O&G Global Service in SEAsia and supporting the main GE LNG equipment and...

    17.3 Hours Later
+5 Other Responses
Area Icon

Distributed Generation In China

We are a primary research firm based in seoul, south korea. We are currently looking for candidates who can speak about distributed generation trends in china. The ideal candidate will be from the following companies and backgrounds: 1) china huadian corporations (sales, marketing, business development, strategy, operation) 2) china sofc (sales, marketing, business development, strategy) 3) state grid coproration of china or china southern power grid (energy planning, energy sourcing) the ideal candidate should be able to explain market trends and needs for distributed generation using natural gas in china and the potential for large-scale fuel cell adoption in china. Thanks,

  1. Profile Picture

    Elghi E. |Chief Design Engineer Hydropower Plants

    my expertise doesnt cover your requirements Thanks Elghi E Segovia...

    10.3 Hours Later
  2. Profile Picture

    Jason |Business Director

    I have China energy background. All my ***** in China energy industry. Currently, I am putt...

    10.4 Hours Later
  3. Profile Picture

    Mehdy |Electrical Engineer

    Hello I interest for this position. Thanks...

    11.9 Hours Later
+7 Other Responses
Area Icon

Gas Turbine

We have an opening with our client in south florida. Perhaps you or someone you know (we pay referral fees) may have interest, please see below: confidential: global leader in power generation construction, equipment & services, a $17 billion dollar public company. Position is with their manufacturing facility in south florida. Title: lead aerodynamic design engineer "new". Position: * the essential functions of the job include, but are not limited to, the following: •provide technical leadership for aerodynamics design team for industrial gas turbines manufacturing. •develop and maintain (continuous improvement) an aerodynamic design system for the overall company. •participate on integrated product teams to execute new aerodynamic design and modifications to existing designs. Requirements: education •bs aeronautical engineering (ae) or similar equivalent is required; msae/ preferred. Knowledge/experience •10- 15+ years experience working with industrial gas turbine blade and vane aerodynamic design including reverse engineering techniques. •this position requires strong technical skills in aerodynamic design from understanding and explaining the basic physics to executing state-of-the-art computer codes and interpreting the results. •candidate must be effective in communicating and decision-making. •outstanding interpersonal and organizational skills required. •travel is required on an as needed basis. Compensation: base salary ($95-$145k range, depending on experience) plus bonuses, 401k, great benefits and re-location expenses to south florida. Please forward resume in strict confidence to career insights, executive search palm city, florida

  1. Profile Picture

    Brent |President

    Please contact me at the given email address. Regards, Brent...

    20.2 Days Later
+1 Other Responses
Area Icon

Murray Steam Turbine

We are looking for a murray steam turbine expert for on site training in nyc immediately. We need training for 8 of our onsite licensed operators. We need the expert to have a full knowledge of murray steam turbines, be able to demonstrate a breakdown of the turbine for inspection, and train us on how to fix the turbine engine. We are a large international organization in new york city, please advise.

  1. Profile Picture

    Brent |President

    We are general engineering company doing training on Turbomachinery of all varieties. We have exper...

    2.7 Hours Later
  2. Profile Picture

    Douglas |Zintro Expert

    I have done numerous steam turbine training programs for both ***** maintenance training on m...

    21.1 Hours Later
  3. Profile Picture

    Joseph |Senior Consultant

    My experience is with larger Steam Turbines than typically seen with the Murray machines. While I w...

    1.6 Days Later
+3 Other Responses
Area Icon

Small Wind Turbine

I am interested in putting a small wind turbine on an acre of land near the hudson river in westchester county, ny that does get heavy wind at times. I need it only to power the electricity in a one story house on the property. Is this something you do and can you tell me the approximate cost. This is a residential area. Thanks you, suzanne whitmore

  1. Profile Picture

    Rob |Executive VP

    Hi Suzanne, Let me suggest something that will save you a pile of money: Contact a local ReDriven o...

    15 Minutes Later
  2. Profile Picture

    Thomas |Aerospace Engineer

    Ms. Whitmore, Thank you for the inquiry. My expertise is in wind turbine blade design and analysis ...

    36 Minutes Later
  3. Profile Picture

    Robert |All levels and disciplines

    Suzanne, Google "small wind" or "home wind turbines" and you'll get a lot of companies that provide...

    1 Hour Later
+5 Other Responses
Area Icon

Vertical Axis Wind Turbine Manufacturing

Savonous type vertical axis wind turbine 1 kilowatt up to 50 kilowatt

  1. Profile Picture

    Panos |Co-Founder / Senior Partner & CEO [Indep

    Hello, we are a renewable energy developer and we also doing projects in Africa where small wtg coul...

    2.1 Days Later
  2. Profile Picture

    Jens |Director of Business Development & Partn

    I know this is a bit ***** I have a mnufacturer in China that can do this for you....

    25.3 Days Later
+2 Other Responses
See More Inquiries

A small gas turbine is a rotary machine, similar in principle to a steam turbine. It consists of three main components - a compressor, a combustion chamber and a turbine.

Top Microturbines Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+