Affordably Source Steel & Iron Production Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Steel & Iron Production Inquiries

Area Icon

Us Steel Wire Market

Our client would like to speak with domestic distributors and experts knowledgeable on the overall steel wire market in the us. They would like to better understand the uses, buyers and sellers, and the manufacturing process from start to finish. This is a 1-hour paid phone consultation. If open to participating, please provide a brief answer to the screener below: please discuss briefly your expertise on the following steel wire products: galvanized high carbon wire gabion galvanized cages steel wire racks subsea pipe armoring steel wires used in suspension bridges please note that we are only interested in your personal point of view and are not seeking confidential information. For every successful referral (client interviews referral) on this project, a $150 bonus is paid to the referrer.

  1. Profile Picture

    Sam |Reliability/Mechanical/Rotating equipmen

    Interested I run a *****. This lab conducts failure analysis, metallurgy SEM/ EDS , FTIR so ...

    13.7 Hours Later
  2. Profile Picture

    David |PSGO SC Cost Operations (Tool Design Dev

    I'm an expert in the field of metallurgy along with wireline and testing. I've been leading in the f...

    14 Hours Later
  3. Profile Picture

    Gary |Manager, Data Analytics

    They would like to better understand the uses, buyers, and sellers. My recent 29-year career incl...

    14.3 Hours Later
+13 Other Responses
Area Icon

Steel & Aluminum Supply Chain For Automotive

I am looking for an expert than can provide me a detailed cost breakdown of steel (carbon and stainless) from the first mining stages of iron ore to the various end products sold to distributors, stampers, consumers, etc…? Ideally, the expert would be able to provide me the production cost details associated with various grades of metals as well as a general understanding of the markup cost through each level of the supply chain. A very rough outline of cost needed is below. 1. Mining of raw material 2. Making of iron 3. Making of steel 4. Rolling/forming of steel 5. Finishing of steel 6. Marketing/selling to consumer

  1. Profile Picture

    Joseph |Director

    Zib31f87 I can perform YouTube and steel company video file research and do a detailed cost breakdo...

    1.9 Hours Later
  2. Profile Picture

    Praveen Kumar |CEO & Director

    Having been in Steel industry for more than 2 decades, I am definitely in a position to discuss the ...

    3.2 Hours Later
  3. Profile Picture

    David |Founder & Principal Consultant

    not interested...

    5.4 Hours Later
+9 Other Responses
Area Icon

Stainless Steel Mills

We get a lot of metal powder scrap. We would like to press this powder into a form, sort of like powder metallurgy. We would like to make 'pressed ingots' and sell them into stainless steel mills. Need help identifying the right equipment, binders, feasibly, etc..

  1. Profile Picture

    Richard |Environmental Engineering Consultant

    I have experience with pelletizers and briquettors and I would be able to ***** *****'s p...

    13 Minutes Later
  2. Profile Picture

    Gary |General Manager

    Our Korean consumer has a *****ess for processing powders, slags, sludge and dross. We Expor...

    1.9 Hours Later
  3. Profile Picture

    David |CEO

    Briquetting was one of my responsibilities during my time at SMS Siemag so I would be happy if I can...

    8.1 Hours Later
+4 Other Responses
Area Icon

Stainless Steel Industry

Hi, we are looking for some insights on value chain and supply chain value additions for the stainless steel industry for the united states and would like to connect with experts who have an experience with stainless steel companies. And comment upon the value chain prevalent in the industry. Please let us know if you would be able to help us on this area, we would be happy to compensate you for your valuable time. Best, aditya

  1. Profile Picture

    Philip |Owner Metals for Packaging (MFP)

    This is a bit outside my field, thanks, so I will have to turn it down....

    4.4 Hours Later
  2. Profile Picture

    James |Technical Advisor

    I have been in the Stainless Steel and Alloy business for 40 years having worked for the largest scr...

    5.9 Hours Later
  3. Profile Picture

    Wayne |Inside Sales

    My stainless background spans over 35 years and includes five different and distinct metal service c...

    6.3 Hours Later
+12 Other Responses
Area Icon

Carbon Steels

We are looking to purchase 1000 tons per year of low carbon steel for our steel wire hanger factory in the usa; can you help to find a good price steel factory for us? And we need low price to complete with china imported products.

  1. Profile Picture

    Milind |Former Senior Manager- Mechanical Mainte

    Dear Sir, Yes. Myself, Milind Thosar, Indian, is interested in the SAME. Please send me your detai...

    7 Minutes Later
  2. Profile Picture

    Muhammad Hassaan |Director

    Hi, sure.. we can supply you good priced steel from China, we are already in this field for several ...

    1.8 Hours Later
  3. Profile Picture

    Monis |Director

    Please provide specific *****t steel grade, size, quantity per size, port of destination ...

    6 Days Later
+11 Other Responses
Area Icon

Carbon Steel

I have a question about chemical requirement for carbon steel (nace mr0175-2) do we have to maximum sulfur level in carbon steel for hic resistant.? acoording to paragtraph 8 there are typical level for sulfur . But in earlier pages in materials section of this standard consided maximum nickle 1% only . We have seamless pipes api 5l that clients want to standardization with nace mr0175-2 too . In api 5l , maximum level for sulfur is 0.015 % . We analysis this pipe and then sulfur percent achieved 0.01%. According to paragraph 8 , is this pipe reject with nace mr0175-2 ? How do you report to clients? Please help me and answer this question

  1. Profile Picture

    Gs |Executive Director

    Hi, Please get back to me. +***** ...

    9.7 Hours Later
  2. Profile Picture

    Klaas |International Project Manager

    Sulfur level always needs to close to zero, not only for the steel but especially for the environmen...

    9.7 Hours Later
  3. Profile Picture

    ivan |Director

    Thanks for your request, please shortlist this response to create a quote...

    11 Hours Later
+8 Other Responses
Area Icon

Stainless Steel Tubes Marketing Strategy

I need marketing plan for gi and ms pipes, who to make marketing plan for gi and ms pipes.

  1. Profile Picture

    Robert |President

    For several years, I have done marketing ***** plans for all types of steel products, inclu...

    2.8 Hours Later
  2. Profile Picture

    Vinciane |director

    We are specialised in marketing ***** launch brands in different markets. He have also indust...

    3 Hours Later
  3. Profile Picture

    Young Mi |COO, GM, EVP, SVP, VP

    Hello, I've written many B2B and B2C marketing plans for companies ranging from the Fortune 200 co...

    3.9 Hours Later
+3 Other Responses
Area Icon

Cost Model On Carbon Steel

Cost model on carbon steel we are looking for an expert who can help us with cost model on carbon steel products - bar, wire rod, hrc, crc. We need insights on stage wise production inputs for both modes - bof and eaf, for a reference capacity set up.

  1. Profile Picture

    Amitesh |Engineer

    This is my area of expertise with almost 23 yrs of experience....

    8.5 Hours Later
  2. Profile Picture

    Robert |Consultant, Instrutor Trainer

    With more than 40 years experience in the steel industry, I'm sure I can help with this enquiry....

    13.3 Hours Later
  3. Profile Picture

    Vinod |Head - Materials ( Procurement, Sourcing

    -Being Head of supply chain Management - It is my key responsibility to procure the Carbon steel...

    22.5 Hours Later
+8 Other Responses
Area Icon

Carbon Steel

Is a carbon steel lap joint flange ok to use on a stainless steel system?

  1. Profile Picture

    William |Regional Sales Manager

    sorry, I don't know enough about fabrication, particularly when mixing stainless with carbon...

    5.4 Hours Later
  2. Profile Picture

    David |Founder & Principal Consultant

    Popester, Welding dissimilar metals (i.e., welding carbon steel to stainless steel) will always cre...

    5.3 Days Later
+2 Other Responses
Area Icon

Steel Casting

Need steel casting foundry expert who is familiar with day to day foundry operations and processes to assist in due diligence evaluation of foundry for purchase

  1. Profile Picture

    Pedro |GENERAL MANAGER

    When and where this job is necessary and time ***** conclude....

    30 Minutes Later
  2. Profile Picture

    Victor Hiram |CEO, President

    How soon do you need this evaluation. ...

    1.1 Hours Later
  3. Profile Picture

    anthony |Dir. Sales & Marketing

    I have worked for a four foundries in my career investment, sand, and foam castings. Please advise w...

    8.1 Days Later
+3 Other Responses
Area Icon

Steel Casting

**** metals and alloys (p) ltd, an indian steel casting company, is looking for retired foundry experts to represent them in the netherlands, france, italy, and germany

  1. Profile Picture

    anthony |Dir. Sales & Marketing

    I have bought and sold investment, sand, foam, & die castings for many years for various foundries h...

    9.4 Hours Later
+1 Other Responses
Area Icon

Stainless Steel Pricing

We are a global market research company who provide services to fortune 500 companies is currently looking for experts with knowledge in pricing mechanism of stainless steel globally.

  1. Profile Picture

    Geoffrey |Chairman

    This is an area in which we are very active. Please refer to our website www.energymnining.org Pleas...

    2.8 Hours Later
  2. Profile Picture

    James |Technical Advisor

    I have been in the stainless steel scrap industry for over 40 years and know the pricing from the sc...

    3 Hours Later
  3. Profile Picture

    Kaushik |Scientific Officer

    I have a PhD in metallurgy of iron and steel. I have published many articles on secondary steel manu...

    3.7 Hours Later
+8 Other Responses
See More Inquiries

Alloy consisting mostly of iron, with a carbon content between 0.2% and 2.04% by weight, depending on grade. Carbon is the most cost-effective alloying material for iron, but various alloying materials exist.

Top Steel & Iron Production Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+