Affordably Source Wind Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Wind Inquiries

Area Icon

Vertical Axis Wind Turbines

I invented a vawt turbine that utilizes flate blade technology and inertial inversion from centrifical force constituting the energy into the central rotor.It also has less than 5% back pressure and less bladedrag.Low wind impressive power outputs and start up as well as winds higher than 50 mph with a power rating many times that of other hawts vawts savonious helixes cycloturbines or any other design.I think it will exploit absolute carnage in the wind industy.You can see my crude protypes on youtube type ***** in search bar and take a look.God bless you and yours

  1. Profile Picture

    Richard |Vice President

    Sir, I have extensive experience in design and wind tunnel testing of vertical axis wind turbines. ...

    14 Minutes Later
  2. Profile Picture

    Bob |CEO

    Hi Dear VAWT Inventor, Good to know that you have some thing that I too have. Your u tube and co. i...

    16 Minutes Later
+2 Other Responses
Area Icon

Wind Energy

I am starting a website that will put extreme pressure on our congress and ho representatives. I need guest posts that introduce wind energy and will represent the status of wind as a viable source.

  1. Profile Picture

    Philip |Founder & CEO

    I am a recognized industry expert with over 60 ***** industry trade magazines and journals...

    57 Minutes Later
  2. Profile Picture

    Jason |Ceo

    Are u payin or just lookin for experts...

    1.1 Hours Later
  3. Profile Picture

    Behzad |Aerospace & Renewable

    I have over 24 years on global industry experience including having served as VP of Technology at Ve...

    1.3 Hours Later
+16 Other Responses
Area Icon

Wind Energy

Our company is a vertical axis wind turbine manufacturer. We are looking for different kind of partners to develop wind energy market in the world, including sales partners in different countries, investors, consultant etc. If you are interested please contact us thanks regards john

  1. Profile Picture

    Sidharth |Managing Director

    We, MEC Intelligence, provide local markets' insight in the wind industry and think can add value in...

    4 Minutes Later
  2. Profile Picture

    Malikireddy |Technical Lead.

    Dear John, Thanks a lot for the Information. I would be glad to shed my network and open up new ar...

    45 Minutes Later
  3. Profile Picture

    Daniel |Chief Manager

    John, Please review my Bio - it's ***** your company align yourselves with experts who ...

    2 Hours Later
+9 Other Responses
Area Icon

Wind O&m

We are a market research firm and a certified zintro partner. We are looking for senior-level experts with significant experience in o&m in wind globally. Ideal would be someone who's headed the o&m vertical/has been on the site for top wind companies (iberdrola, edp, egp, etc) or someone involved in wind oems/turbine maufacturers (e.G., gamesa, ge). Subject matter experts please apply. Regards, hardik banga insight alpha

  1. Profile Picture

    Malikireddy |Technical Lead.

    Hi , pls chk my linked in profile and let me know.. ...

    8.1 Hours Later
  2. Profile Picture

    Behzad |Aerospace & Renewable

    I have over 25 years of industry experience and I consult globally with major wind OEMs, operators, ...

    8.7 Hours Later
  3. Profile Picture

    Lawrence |Chief Operating Officer

    Call up to 1 hour in duration....

    14.3 Hours Later
+5 Other Responses
Area Icon

Wind Turbine Design

I want to build a 30kw wind turbine with a 22ft blades how do i calculate the stress on the tower in high winds. What size pipe should i use for a guided tower. I also need to calculate the amount of concrete weight needed for the guide wires.

  1. Profile Picture

    Thomas |Aerospace Engineer

    Thank you for the inquiry. If this is a wind turbine you purchased, the manufacturer will be able to...

    25 Minutes Later
  2. Profile Picture

    Tom |President

    I am sorry, but right now I am very busy, I suggest that you speak with a tower company to get the i...

    6.1 Hours Later
+2 Other Responses
Area Icon

Wind Technology

Sir, we have a query, do you have any suggestions, in a low windy area if we create a high speed wind atmosphere of 20 m/sec on blades to turn the turbine blades, are we going to be successful in power generation? What force required for air to turn the blades? How the force to be calculated? . . .

  1. Profile Picture

    Kanaga |Energy Consutant

    Please read Wind_power on Wikipedia There is quite a bit of terminology with aerofoils. The angle o...

    2.2 Hours Later
  2. Profile Picture

    Jens |Director of Business Development & Partn

    20m/s is an awful lot of wind and i would be VERY interested to know how you would "generate" that. ...

    7.7 Hours Later
  3. Profile Picture

    Rhyno |CEO

    Hello - I am not an engineer so I can only answer you question in general terms. Many wind turbines...

    9.3 Hours Later
+19 Other Responses
Area Icon

Vertical Axis Wind Turbine Manufacturing

Savonous type vertical axis wind turbine 1 kilowatt up to 50 kilowatt

  1. Profile Picture

    Panos |Co-Founder / Senior Partner & CEO [Indep

    Hello, we are a renewable energy developer and we also doing projects in Africa where small wtg coul...

    2.1 Days Later
  2. Profile Picture

    Jens |Director of Business Development & Partn

    I know this is a bit ***** I have a mnufacturer in China that can do this for you....

    25.3 Days Later
+2 Other Responses
Area Icon

Wind Turbine Manufacturing

What is the cost for 200w wind turbine generator with controller unit and inverter and battery?

  1. Profile Picture

    Vladimir |CSO

    200 W gen must be something like 300bucks. Stand alone 200 W inverter seems to be like ***** bucks ,...

    6.6 Hours Later
  2. Profile Picture

    Tom |President

    I don't sell something that small, but online I find them for about $600 for the turbine, about $80 ...

    11.3 Hours Later
  3. Profile Picture

    Bhrigu |President & CEO

    Mr. Rico - cost can vary significantly on the basis of your design and ***** your supply chain...

    1.5 Days Later
+4 Other Responses
Area Icon

Wind Turbine Manufacturing

I need help to prepare an estimate cost for a small wind turbine manufacturing factory. The factory should be fully equipped to manufacture generators, blades, supporting arms for the blades, supporting hub for the generator and the supporting structure/pole for the whole wind turbine. Other than this, there would be inverters and controllers for the wind turbine manufactured in the same factory. There will be a packaging section too. The factory should be capable of producing up to 100 small wind turbine systems per day. This is for preparing a project report. I need expert advice on the types of machineries involved and it's cost.

  1. Profile Picture

    Miguel Catalin |Mechanical Engineer

    I would like to know the power you want to ***** the wind turbine...

    19.1 Hours Later
  2. Profile Picture

    Behzad |Aerospace & Renewable

    I have over 25 years of industry experience, have served as VP of Technology at Vestas and I have al...

    19.1 Hours Later
  3. Profile Picture

    Richard |Technical Manger UK

    I have 30+ years in wind energy and in particular the design, manufacture and supply....

    19.5 Hours Later
+22 Other Responses
Area Icon

Wind Energy

Wind turbine manufacturing and wind farm construction we are an egyptian green energy a newly established company our project is going through 2 stages the first stage will be manufacturing the wind turbine second stage is to install the wind turbine into a wind farm. Wind technology, the production line, the management will be through a union of american and french companies our factory will be mobile, fully automated, can produce onshore, and offshore wind turbine, also can produce either small or huge wind turbines. Our target is to produce 2000 turbines of the 10mw/ h during one year. It is a huge project as we believe we will depend on100% leasing module in financing the project. Now we are forming our board experts members, and the supporting consultant teams. We had an agreement with some famous and with good reputation experts in more than one specialty. Negotiations are still running with others. Also we hope if we can join foreigner experts in different aspects that may benefit the project such as experts in different wind energy aspects, financing solution, legal aspects, marketing, management, and planning. Our experts will be paid through a percentage of the net profit our project value evaluation may be as much as 4-5 billion dollars. What we need from our experts? 1- we need to assess the best sites to start our wind farm either onshore or offshore. 2-doing the complete feasibility study of the whole project. 3-choosing the best wind turbine or turbines that should be produced in our factory? 4- marketing research 5- financial solutions 6- others if you feel it is a challenging project and suits you please contact us. Best regards, sameh

  1. Profile Picture

    Kurt C. |Consultant

    Sorry, can you clarify please: You aim at building 2000 units of 10MW (per unit) wind turbines? If ...

    1.6 Hours Later
  2. Profile Picture

    Shankar |Sr. Manager - R & D

    Hi, I am interested in this project. You can see my expertise from my profile. Contact details: Ema...

    9.8 Hours Later
  3. Profile Picture

    Valentin |Project Development Manager

    Dear Sameh, As I told you, I can support you on this project. But mu current project, can realease m...

    10.5 Hours Later
+7 Other Responses
Area Icon

Wind Turbines

Look for a expert to help on simple wind turbine design

  1. Profile Picture

    Kanaga |Energy Consutant

    To determine the ***** of wind turbine to use, review your monthly electricity consumptio...

    2 Hours Later
  2. Profile Picture

    Antony |Principal

    I would like to know which portion of the turbine design? Blade, Drive? Electrical..etc. Thanks!...

    2.3 Hours Later
  3. Profile Picture

    Paul |Mechanical Engineer

    20 MW? You have big goals since the biggest is 10 and that isonly theoretical at this point. The Nor...

    17.1 Hours Later
+23 Other Responses
Area Icon

Wind Energy

We own a non-profit children's camp on 67 acres on a dead-end street. Behind us is a state forest with a 1000 acres. We are on the top of a hill and have good wind. Tax-credits are of no value to us, because we are non-profit. We need to know if our site is the potential capacity for a windmill that would generate net profits. We need to know the cost of erecting test towers? Financial cash-flows on investments? Who is the operating manager?

  1. Profile Picture

    Rhyno |CEO

    Hello - it's tough to try and ***** questions over an email. There's a lot to *****...

    41 Minutes Later
  2. Profile Picture

    Steven |CEO

    Dear campwoodhaven. Given your ***** location, I am obviously not the right person for yo...

    10.4 Hours Later
  3. Profile Picture

    Andre |Chief Scientist

    if you have forest the wind speed is broken so you will need a taller mast I have to make measureme...

    23.1 Hours Later
+5 Other Responses
See More Inquiries

Top Wind Experts

See More Experts
Share
LinkedInTwitterFacebookGoogle+