Affordably Source Wind Tunnel Experts and Industry Participants for Market Research, Diligence and Projects

Submit an anonymous Project Description -- Start receiving responses within a few hours

Have a need? Explain it here






How Zintro Works

  1. 1. Provide a clear description of your needs and your expectations of an expert, consultant or job candidate and Zintro will match it with the most relevant professionals in our platform.
  2. 2. Within a day or two typically 6 - 12 Experts, who have opted-in, will contact you with a brief explanation of their qualifications and how they can help.
  3. 3. You can communicate back and forth, qualify each other, connect and pay fees to Experts through Zintro.
  4. Zintro is free, anonymous and without obligation.

Loved by Thousands

Loved by thousands logos

Need Help?A phone icon1-877-236-7016

Recent Wind Tunnel Inquiries

Area Icon

Wind Tunnel

Hello, looking to understand in dept about wind tunnels used in for automobile testing, and also to identify major players in the segment. Thanks prateek

  1. Profile Picture

    Richard |Vice President

    Hello. Would be glad to do consult. I have >40 years of wind tunnel experience, including automotive...

    4.9 Hours Later
  2. Profile Picture

    Kaushik |Scientific Officer

    I have 16 years of experience in wind tunnel research. I have been part of different projects on aut...

    10.3 Hours Later
  3. Profile Picture

    Dominic |Lecturer

    I can help, but your best source of *****d be Dr. Jewel Barlow at the University of Maryl...

    1.4 Days Later
+4 Other Responses
Area Icon

Wind Tunnel

I have set up a wind tunnel, want to deduce drag due to support on results that is drag and lift coefficients. I would like to know the procedures (additional set up if required) to find the corrections required on my results.

  1. Profile Picture

    Richard |Vice President

    Sir/Madam, Please clarify -- is your model mounted by a rear-entry sting, or by a three-point strut...

    20 Minutes Later
  2. Profile Picture

    David |Principal Engineer & Director of Busines

    A decent *****d be to measure the lift and drag on the support alone, but that will mis...

    19.2 Hours Later
  3. Profile Picture

    Alberto "AL" |Sr. Principal Engineer

    Please send me more details of what you will be needing for an expert. Thank you...

    20.9 Hours Later
+5 Other Responses
Area Icon

Wind Power Investment

I am looking for an expert for wind power investments.Please contact via znote.

  1. Profile Picture

    Richard |VP Business Development

    What do you want to know about wind power investments? The most recent close of a project I worked ...

    17 Minutes Later
  2. Profile Picture

    David |PRESIDENT

    Specialized in offshore wind farm ventures, including being a recent guest speaker on wind park fina...

    1.6 Hours Later
  3. Profile Picture

    Chris |President

    interested in discussing with you Chris Varrone...

    1.8 Hours Later
+8 Other Responses
Area Icon

Wind Power System

Small wind power system manufacturer is seeking a professional engineer to assist with footing designs and other building code-related drawings for our installations. Guy wire design and experience in pennsylvania is a plus. Pe is required to review and modify our cad drawings and stamp.

  1. Profile Picture

    Suraj |CEO

    Dear Sir/Ma'm, We are very much humble to introduce about our CADD / BIM outsourcing services Cadeos...

    6.8 Hours Later
  2. Profile Picture

    Guy |President & CEO

    Thanks for inquiring with Czero, but we do not have experience in footing designs so I am sorry we c...

    5.2 Days Later
  3. Profile Picture

    Milutin |CEO

    Because, I have many years ( 32) in Structural analysis and Design in all aspect of wind turbine to...

    17.6 Days Later
+4 Other Responses
Area Icon

Mini Hydels,wind Power

I have identified nearly 1000mw wind power generation spots,with complete formalities done,if investors are available at least 100mw windpower can be in production with in 24 months full capacity.50mw with in 12 months.

    +undefined Other Responses
    Area Icon

    Aerodynamics

    Sir i am a aerospace student studying in dubai , u.A.E. I thought of doing my project on wind tunnels for example testing an a 380 small scaled wing or doing test of various aerofoils based on naca. Other than this i was suggested by my group members to do cfd ( computational fluid dynamics) project such as on a carburetor or on winglets of an aircraft . I would like to know which one would be an better idea since my time limit for the project is two and half months and would give me a better knowledge in my field and future. I would really be thankful to the reply in advance for taking time in busy schedule . Thanking you varun

    1. Profile Picture

      ANTHONY (Tony) |Professional Engineer

      I would recommend the Carburetor since you are limited to two months of work. Tony P...

      1.2 Hours Later
    2. Profile Picture

      Richard |Vice President

      It would be difficult to learn and apply CFD in that period of time (unless you already have some ex...

      1.6 Hours Later
    3. Profile Picture

      Rupak |Senior Scientist

      I think CFD will be initially good and give you ***** the *****lts. Thanks, Ru...

      16 Hours Later
    +5 Other Responses
    Area Icon

    Wind Power

    I'm looking for wind power consultants and developers in new brunswick, canada

    1. Profile Picture

      Richard |Vice President

      Is your interest in the ***** existing wind turbine hardware or in the development of ne...

      9 Minutes Later
    2. Profile Picture

      edwin |engineering

      Hi How can I be of service willing to travel...

      14 Minutes Later
    3. Profile Picture

      David |International Business Development Direc

      I work with Spanish Developers with experience in Wind Power projects worldwide. They might be inter...

      18 Hours Later
    +4 Other Responses
    Area Icon

    Wind Energy

    Request for wind project counciling: we are looking to install 200 mw wind power in northern iraq and i wounder if you are interested in helping us with this project

    1. Profile Picture

      Mark |.

      What level of expertise are you looking for? I have experience with most of the analysis and planni...

      29 Minutes Later
    2. Profile Picture

      Pedro |Service Added Value Developer

      Hi I'm interested, My best regards...

      40 Minutes Later
    3. Profile Picture

      Mojtaba |CTO

      Kindly, Describe the project stage and what area/s you need assistance with. My expertise are in win...

      50 Minutes Later
    +21 Other Responses
    Area Icon

    Wind Tunnel

    Wind tunnel experts for a potential plaintiff injured while trying out a wind tunnel

    1. Profile Picture

      Willem |President

      My company provides wind tunnel testing services and we are aerodynamic experts. I also teach a cla...

      46 Minutes Later
    2. Profile Picture

      Kurt C. |Consultant

      Dear Sir, I am an aeronautical engineer, available for online consulting if you wish. Regards, Kurt ...

      4.1 Hours Later
    3. Profile Picture

      Richard |Vice President

      I have 40 years of experience in wind tunnel testing. This includes wind tunnel design, vertical win...

      6 Hours Later
    +7 Other Responses
    Area Icon

    Wind Power

    We are building 10 one acre greenhouses to the south of deming, nm. To produce organic vegetables. We would like to consider windmills to address the pump/fan loads and possibly the heating of the greenhouse. Our current annual electric cost per house is about $23,000 and propane is about $65,000/year. We have 160 acres on which 15 will be occupied by the greenhouses. Is it feasible/economical to consider windmills for the electric and/or the heating?

    1. Profile Picture

      Rachel |Vice President - Greenergy, LLC

      The payback and ROI is going to depend on several inputs, including turbine technology, government i...

      4.2 Hours Later
    2. Profile Picture

      Rafael |Managing Partner

      Hi Tdstong, I have experience in small wind (1 - 2 MW). Right now I have 6 projects in that range ...

      9.1 Hours Later
    3. Profile Picture

      Tom |President

      If I might offer the following, One 5 kW wind turbine for each and with that a solar array as well, ...

      12.5 Hours Later
    +5 Other Responses
    Area Icon

    Wind Power Feasibility

    Is it possible to invite wind power generating companies to check out my farm for a possible wind turbine site?

    1. Profile Picture

      Arie |Principal

      I have strong background in different aspects of wind energy value chain. See below a partial list o...

      18 Minutes Later
    2. Profile Picture

      Kurt C. |Consultant

      Well, where are you located? (This Zintro tool was not intelligent enough to pass on such kind of in...

      20 Minutes Later
    3. Profile Picture

      Robert |Principal Consultant

      Hi, which country and where in that country is your farm? Rob...

      48 Minutes Later
    +11 Other Responses
    Area Icon

    Aerodynamics

    I'm a freelance journalist working for a pr company in the uk. I am writing a story on the potential dangers that a camera could pose when fixed to a motorcyclist helmet. I am looking for an expert in aerodynamics that would be able to comment.

    1. Profile Picture

      Sameer |Scientist

      I have 6 years of experience in external aerodynamic ***** analysis and design of aerospac...

      2.5 Hours Later
    2. Profile Picture

      Richard |Vice President

      I can comment on this. I have extensive low speed aerodynamics experience, including ground vehicles...

      3.4 Hours Later
    3. Profile Picture

      New |

      I have worked for 50 years as an Aerodynamicist for Rolls-Royce, GE and Siemens. I consult for Gas t...

      4.9 Hours Later
    +6 Other Responses
    See More Inquiries

    Top Wind Tunnel Experts

    See More Experts
    Share
    LinkedInTwitterFacebookGoogle+