Wi-fi software developer in china - company or engineer. Knowledge of current wifi modules, practical experience in developing wifi products working with routers and available for general public (like water heaters, light switches, etc). Compatibility with different routers and routers modes+5 Other Responses
Wireless Mesh Networks
We are looking to do multiple paid phone consultation with experts with extensive knowledge in the manufacturing and designing of point-to-point, point-to-multipoint, and wireless mesh networks. We would like to understand the value proposition of these solutions relative to private and public cellular and wi-fi networks, especially in the application of vehicle automation, video surveillance, and passenger wi-fi. Finally, we would like to understand the impact of 5g’s release on the competitive positioning for these solutions.
This would be for a 1 - hour paid phone consultation. Please respond with a few brief statements as to your relevance in this space.
1. What is the extent of your experience with designing, implementing, and monitoring wireless networks for use in long distance or remote area applications?
2. Would you be able to give an overview on performance comparison of mesh networks (throughput and latency) and its key differentiators relative to lte? Please answer briefly.
3. Can you share your insights on the competitive advantages and the effectiveness of mesh networks relative to its competitors (cellular, wifi, wireline) and how the 5g release can impact these?
4. Kindly rate your familiarity with industry participants (1 not familiar, 5 very familiar)
a. Proxim wireless
e. Axxcss wireless / moseley+35 Other Responses
Layer 1 layer 2 layer 3lte, umts, gsm+7 Other Responses
We are looking to speak to multiple decision-makers / contractors from construction companies and senior staff employees from large, medium, and small construction software companies in the us on market and pricing (annual spend) of office and fieldwork application softwares (ex. Fieldwire, plangrid, jobflex, tsheets, etc.).
This is a 35-40 minutes paid phone consult. Please consider summarizing your relevant experience with short answers to the questions below:
for general contractors:
1. Is you company consist of 50 or more employees?
2. Are you a decision-maker for software for office and fieldwork software? (examples are fieldwire, plangrid, jobflex, tsheets, etc).
3. Are you familiar with the annual spend for these types of applications?
For senior employees of construction application software companies:
1. Are you familiar with the annual spend for large, medium and small construction companies for applications both in the field and in the office?
2. Can you differentiate between the office app side and the fieldwork app side?+7 Other Responses
I'm looking for a commercial wireless consulting firm in s/e wisconsin for a large complex for both internet, tv and possibly phone communications. Design and install will be preferred.+2 Other Responses
consulting opportunity re: wireless communications
seeking subject matter experts (smes) to assess novel intellectual property (ip) in the above field, and determine its commercial viability
(i.E., licensing, new products/services, and/or start-up opportunities).
- the assessments will be brief engagements, 2-6 hours and on a intermittent basis.
- work will be online and telephone.
bachelorâs degree, minimum 10 years in the field, with broad overview of the wireless communications field.
Preferably u.S.-based consultancies.
Areas of expertise:
looking for smes with strong r&d/technical background, and/or a
preference for smes with direct experience in product development and commercialization in the field, including entrepreneurial experience.+14 Other Responses
Looking for a little help to run wireshark in monitor mode (either on xp, win7, win8 or ubuntu).
i have a few supported wireless adapters (tp link tl-wn722n, netgear a6200) but can't get it to capture the (uncrypted) tcp traffic from my other computer on the network. (it only shows mdns traffic)
i can follow directions well, but haven't found any single reference that walks thru the procedure of how to do it. +2 Other Responses
Internet Of Things
We're the investors in russia looking for an expert with knowledge of the internet of things new projects and startups, specifically in b2c area. The goal is to find a potential startup/company/idea in us or elsewhere which we could transfer to russian soil and implement in russia. We have good connections in china including manufacturers of wifi modules and developers of cloud/server software both in china and in russia, and experience in developing wifi appliance project . .+16 Other Responses
Wireless Communications Industry
I want to convert a 4-20 ma dc signal (from a sensor) to a suitable frequency and then want to transmit that to a 10 km. Distant place through wireless transmitter and thereafter receive the frequency by a suitable receiver and then convert again the frequency into the original 4-20 ma dc signal. What type of online wireless transmission system will do the work easily?+9 Other Responses
The zintro blog needs you!i am looking for your expert opinion on the news below.Your response may be used in an article that i will write and post on the zintro site.Your contribution is voluntary,and while there is no direct payment involved,getting your name and expert opinion published on our blog is a great marketing opportunity that will increase the amount of traffic to your expert profile.
As a featured expert,you will be named and a link to your profile will be included.Here is a sample:
if interested,please send me your one-to-three paragraph response to the following news via znotes within the next few days:
this month google pilots project loon to provide internet access to remote areas and improve current coverage.The venture will float 30 balloons into the stratosphere where winds carry them around earth.Each balloon provides connection to about 25 miles of ground area via building antennas.Once this technology is tested and refined,how and to what extent will it be adopted and utilized?
Please include your full name so we can link it to your expert profile and get you more presence on zintro.Let me know if you have any questions.
gabriela meller+6 Other Responses
Wireless Audio Solution
Looking for someone to help with a wireless audio solution. Need individual who understands amplifier boards and how to integrate wireless communications device. Wireless chip to be integrated is a texas instrument: cc8530 pure path wireless audio chip.+3 Other Responses
B2b Marketing Plan Development
Company background information:
we manufacture a wireless communications and real time production status system that measurably improves the profitability of a production operation. This is accomplished by providing innovative solutions that reduce downtime and improve production efficiency by immediately identifying and rectifying production abnormalities. Our systems offer a complete solution from incident or data capture to reporting. Our systems can be customized for any production environment in that our systems are engineered to be modular, configurable and flexible. Our customers typically realize a 250% return on their investment within the first year.
we are recognized as the worldwide leader for andon, visual management and factory floor communications system solutions. The company is also recognized as innovator for wireless technology and display software for improving factory floor productivity making us the first choice of factories for andon, visual management, communication, and data collection systems.
approximately 37,000 manufacturing plants in the united states that have more than 100 employees and 100,000 square feet.
Ideal candidate experience/background:
experience in developing marketing plans for a system or product solution that is sold into the industrial marketplace – business to business. Marketing a system or product solution that is a capital purchase with a moderate to long sales cycle. The system is sold to a diverse marketplace spanning many industries and environments. Ability to develop a plan for a broad market where the target market can be any production facility with more than 100,000 square feet or 100 employees regardless of industry. The decision to buy a system starts with the plant recommending the purchase of a system and typically requires corporate level approval for the capital expenditure. Marketing influence needs to be focused at the individual plant level.
Marketing plan development requirement.
We are in need of comprehensive marketing plan that will be the foundation for the company’s marketing activity. We would like a phased approach in developing a plan starting with a plan outline, moving on to developing background resource information which would lead to the development of plan.
Possible marketing approach concept: what are the issues and problems that our system addresses? Reach out with a campaign that outlines common manufacturing issues and problems and highlight our product’s ability to provide solutions for the issues and problems. +40 Other Responses